If you want to buy the product, asking price or have any questions, you are free to contact our customer service.
Construction waste recycling line
Construction waste recycling line specific parameter configuration
Mineral grinding production line
Mineral grinding production line specific parameter configuration
T130X Ultrafine Mill for sale
T130X ultrafine mill is a new facility designed by XSM expert basing on statistical analysis and a large number of suggestions from users and the innovative design of the super pressure trapezoidal mill. T130X Ultrafine Mill for sale, It has superseded and optimized in the structural characteristics of trapezoidal MTM mill, and it also forms its own unique characteristics.
T130X Reinforced Ultrafine Mill consists of main frame, speed reducer, analysis, maintenance platforms, fans, bypass powder collector, cabinet and other components. Auxiliary by the jaw crusher, bucket elevator, electromagnetic vibrating feeder, storage silos and other components.
T130X Reinforced Ultrafine Mill Operating Principle
Bulk materials are crushed by jaw crusher to the desired size, T130X Ultrafine Mill for sale, by the elevator sent to the storage hopper, and then the vibrating feeder evenly send the material into the host and continuously grinding in mill room, after grinding, the powder will flow up by the wind machine, and classified by the classifier, the standard powder will flow through the bypass pipe into the powder collector, the collection were isolated by a valve discharge, this is final powder. Airflow flow through the top back pipe of the bypass collector to centrifugal fan, the air system is closed loop negative pressure that ensured the production site environment security.
T130X Reinforced Ultrafine Mill Features
Features:
1. The body connected to the base of all soft contact without rigid contact
This avoid body vibration to analyzer, improved the accuracy of the analysis.
2. The base made of high strength ductile cast iron
Ductile cast iron has the performance of damping force of molten steel, and good impact resistance.
3. Use of Germany Flender reducer
It fully exploited the technical advantages of professional manufacturer to improve the stability of the machine.
Reducer and motor is driven by the triangle belt for transmission for overload protection.
4. The coupling of the elastic sleeve is used in the main unit and the gearbox, which avoided the phenomenon of easily breaking nylon pin, thus improving the reliability of equipment.
5. Analyzer machine applies high-density blade
The classifier uses high-density blade that can increase the fineness of powders and the production capacity. Practice shows that in the case of velocity remained unchanged, the density of the leaves can increase the fineness of the finished products. In other words, in the case of the same finesse, high-density blade is driven by a lower rate than that of low density, thus reducing air resistance and increasing production.
Adopting a new structure of the blade wheel prevented the escape of the coarse powders.
6. Analyzer with a frequency control
It adopts the variable voltage and variable frequency to save more energy than the electromagnetic ones, and with the characteristics of accurate control, flexible process control, and high degree of automation.
7. Use of dust bypass collector
The dust bypass collector has an insulation cavity to reduce dusty gas escape from the lower vents. Compare with other dust collector, the bypass dust collector are high-efficiency and less pressure loss, particularly for collecting dust particles that is difficult to collect by the general collectors.
8. Equipment layout of the equal resistance design The equal resistance arrangement to avoid using of two different dust collector outputs power, improved dust collector’s performance, reduced internal circulation, and increased production of the mill.
9. Two collector discharge ports and dust collector are of a straight line arrangement to facilitate the materials centralized collection, which is labor saving and easy packing.
10. Establishing maintenance platform to make the mill maintenance more convenient and secure.
Adopt flexible connection between the mainframe and the classifier, avoiding too much vibrating
Using Germany Flender reducer ensure that it has reliable performance.
Classifier applies high-density blade and it is easy to adjust the by equipping frequency control system.
Applying dust bypass collector, it won’t bring environment pollution.
Optimized design make powder centralized collection and packing become easy.
T130X Reinforced Ultrafine Mill Technical Data
| Name & Model | T130X | |
| Ring roll number (pcs) | 4 | |
| Major diameter of roller (mm) | Φ410×210 | |
| Inner diameter of roller (mm) | Φ1300×210 | |
| Revolving Speed (rmin) | 103 | |
| Max feed size (mm) | <30 | |
| Final size (mm) | 0.074-0.038 | |
| Output (T) | 1.8-6.5 | |
| Complete physical size (mm) | 7390×9960×8245 | |
| Main motor | Model | Y280S-4 |
| Power (KW) | 75 | |
| Rotate speed (rmin) | 1480 | |
| Induced draft fan motor | Model | Y280M-4 |
| Power (KW) | 90 | |
| Rotate speed (rmin) | 1480 | |
| Classifier speed regulating motor | Model | Y160L-4 |
| Power (KW) | 15 | |
| Rotate speed (rmin) | 1460 (Frequency converter speed control) | |
| Elevator | Elevator model | TH210 |
| Model | Y100L2-4 | |
| Power (KW) | 3 | |
| Rotate speed (rmin) | 1430 | |
| Jaw Crusher | Jaw Crusher model | PE 250×400 |
| Model | Y180L-6 | |
| Power (KW) | 15 | |
| Rotate speed (rmin) | 970 | |
| Magnetic vibrating feeder | Model | GZ3F |
| Power (KW) | 0.2 | |
T130X Reinforced Ultrafine Mill Application
T130X reinforced ultrafine mill is mainly used in processing materials of metallurgy, building construction, chemicals and mining industry, such as feldspar, calcite, talc, barite, fluorite earth, ceramic , bauxite, phosphate rock, iron oxide, slag, clinker, chemical fertilizers, compound fertilizers, fly ash, coal, coke, lignite, gypsum, graphite, etc.