
If you want to buy the product, asking price or have any questions, you are free to contact our customer service.



Construction waste recycling line
Construction waste recycling line specific parameter configuration

Mineral grinding production line
Mineral grinding production line specific parameter configuration
VSI5X Series Crusher,Cobble Stone Quartz Limestone Crushing Machine.
VSI5X series of new sand making machine is a new generation in the development of VSI series sand making machine with the introduction of German Technology Company, which has a number of independent patent property rights based on the VSI series sand making machine and set three broken mode in one. It has become the core equipment of sand industry mechanism.
Sand Making Machine Advantages:
Reduce cost and design optimization:
Head design combined polishing, only need to replace worn expected to throw the first part, the use cost can be reduced by more than 30%; week shield local wear can use the up and down a U-turn, VSI5X Series Crusher,Cobble Stone Quartz Limestone Crushing Machine. improve material utilization rate of more than 48%; the diamond impact block, avoid material impact wear damage made board.
The greater yield greater rate:
By the deep cavity type rotor is optimized, so that the material is increased about 30% by weight; curved design of emission opening and optimal smoother, reduce the flow resistance of materials, greatly improve the material through capacity, increase the machine capacity.
Convenient and safe operation:
Two purpose powder tray, simple operation, to achieve the two feeding mode – the center feeding and feeding with annular waterfalls falls fast conversion of the feed -; product selection of class F insulation, high protection grade motor protection class IP54/55 high efficiency, low noise.
Special seal repair convenience:
The lower end of the main shaft sealing structure is special, to ensure that no oil is not leaked, to reduce fuel consumption; hydraulic Japan imported accessories cover opening device, mobile convenient cover, so that the replacement and repair of the internal parts of saving time and labor.
Application
Feedstock Size: 30-50mm
Throughout:70-640T/h
Fields Of Application:It is applied for sand quarry, mixing station, dry mortar, quartz sand, construction waste crushing and other industries, for highway, high-speed railway, high-rise buildings, municipal, hydroelectric dam construction and concrete mixing station to provide quality sand aggregate etc.
Suitable Materials:It is suitable for cobble stone, quartz, limestone, coal gangue, basalt, granite, and diabase.
Technical Data
Model | Feed at center&sides | Feed at center | Soft Material | Hard Material | REV (r/min) | Power (kw) | Motor Model | Machine Size (mm) |
Capacity (t/h) | Max.Feeding (mm) | |||||||
VSI5X7615DR | 150-280 | 70-140 | 35 | 30 | 1700-1900 | 4-75×2 | Y280S-4/75 | 4100×2330×2300 |
VSI5X8522DR | 240-380 | 120-190 | 40 | 35 | 1500-1700 | 4-110×2 | Y315S-4/110 | 4140×2500×2700 |
VSI5X9532DR | 350-540 | 180-280 | 45 | 40 | 1300-1510 | 4-160×2 | Y315L1-4/160 | 4560×2600×2900 |
VSI5X1145DR | 500-640 | 250-360 | 50 | 45 | 1100-1310 | 4-220×2 | Y355M1-4/220 | 5000×2790×3320 |
Sand Making Machine Working Principle
The center into hopper: material feeding into, the center feeding hole into the high-speed rotating rotor was sufficiently accelerated and the emission mouth out, first with rebound after free falling a portion of the material impact, and impact to the vortex shaped material around the vortex cavity lining (or counter block), first be bounced back to the top of the crushing chamber, after partial steering motion, forming a continuous material curtain and emitted from the impeller material impact, finally discharged.
Center feeding with annular waterfalls falls into hopper: material feeding into, again through the annular aperture falls, is the bulk material plate into two shares. VSI5X Series Crusher,Cobble Stone Quartz Limestone Crushing Machine. A unit divided tray into the high-speed rotation of the impeller, another from the circumference of the lining plate down, into the impeller material, was rapidly accelerated in the impeller speed out, first with the bulk material another portion of the material around the free fall impact plate broken, and impact to the vortex shaped material around the vortex cavity the lining (or counter block), is first bounced back to the top of the crushing chamber, after partial steering motion, forming a continuous material curtain and emitted from the impeller material impact, the discharged.